Beko WMY 71023 LMB3 User Manual page 18

Discharging the water when the product does not
have an emergency draining hose:
a Place a large container in front of the filter to catch
water from the filter.
b Loosen pump filter (anticlockwise) until water starts
to flow. Fill the flowing water into the container you
have placed in front of the filter. Always keep a piece
of cloth handy to absorb any spilled water.
c When the water inside the machine is finished, take
out the filter completely by turning it.
4 Clean any residues inside the filter as well as fibers,
if any, around the pump impeller region.
5 Install the filter.
6 If the filter cap is composed of two pieces, close the
filter cap by pressing on the tab. If it is one piece,
seat the tabs in the lower part into their places first,
and then press the upper part to close.
Indicative values for Synthetics programmes (EN)
Synthetics 60
Synthetics 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that small
differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.
18 / EN
3 50 0.95
3 50 0.73
Remaining Moisture
Content (%) **
≤ 1000 rpm
01:56 45
01:45 45
Washing Machine / User's Manual
Remaining Moisture
Content (%) **
> 1000 rpm
40
40