Table of Contents
Advertisement
2. Connect a
micro-B USB cable
on your computer.
3. Upon connecting the board, Windows will automatically attempt to install the driver and,
unsurprisingly, it will fail. We'll have to manually install the driver.
4. Open up the Device Manager. (Either Start > Run > devmgmt.msc, or go to the Control Panel,
select System and click Device Manager.)
5. Locate the Gadget Serial v2.4 device, under the Other devices tree. Right-click that and select
Update Driver Software...
6. On the first window that pops up, click Browse my computer for driver software. And on the
next page select Browse... and navigate to the
Arduino Galileo software installation. Then click Next.
from the Galileo's USB Client port to an available USB socket
hardware\arduino\x86\tools
Page 9 of 20
folder within your
Advertisement
Table of Contents
