Table of Contents
Advertisement
the name.
Example Mac directory structure. We've renamed the application to ArduinoGalileo to differentiate it
Double-click your newly downloaded Arduino application to run the IDE.
Linux Install
Linux users need to use the
should do.
linux32.tar.gz
It's also necessary to disable the modem manager on most Linux distributions, to enable
uploading to the board. This will vary by distro, but something like
will work.
Once installed, run the arduino file in the extracted directory. From a terminal, you can enter
to run it.
Driver Installation
Once you've downloaded and installed the software, the next step is to connect the board and install
drivers. This process differs on each operation system, follow the directions below that pertain to
your OS:
Windows
Mac OS X
Linux
Windows Driver Install
1. Connect a 5V power supply to the Galileo. (The USB port alone cannot supply enough power
to run the Galileo.)
from our other Arduino install.
tool to extract the tar.gz file. A command like
tar
Page 8 of 20
tar -zxvf arduino-1.5.3-
sudo apt-get remove modemmanager
./arduino
Advertisement
Table of Contents
