Operating Your Freezer; Control Panel - Summit SCFF1842 Owner's Manual

Control Panel

The freezer should be placed where the ambient temperature is between 61 and 86°F (16 to 30°C). If the
ambient temperature is above or below this range, the performance of the unit may be affected. For
example, placing your unit in extremely cold or hot conditions may cause interior temperature to fluctuate.
ON/OFF Power
To turn the appliance on or off, press the ON/OFF button.
Setting the Temperature Control
•
Connect the power cord to a properly grounded outlet. In the event of a power interruption, all
previous temperature settings are automatically erased and the compartment will default to a
preset temperature setting of -18°C (0.4°F).
•
Set the desired cooling temperature by pressing the corresponding button
depression of the buttons will raise or lower the temperature setting by 1 degree. The temperature
selected will flash in the LED display for approximately 5 seconds, then revert back to display the
temperature of the interior cabinet.
NOTES:
• The temperature setting can be adjusted from -10°C to -30°C（from 14°F to -22°F).
• To view the "set" temperature anytime, press
in the LED display for 5 seconds.
• This unit has the option of displaying temperatures in either Celsius or Fahrenheit. To change
the setting, press the °C/°F button.
• The temperature inside the cabinet may vary slightly depending on whether stored items are
located in the upper/middle or lower section.

OPERATING YOUR FREEZER

or once. The "set" temperature will flash
6
Control panel
or . Each