Sharp TE-T56U Operation Manual page 22

C A R E A N D C L E A N I N G
Assembling the Tea Mortar
1
Position the " オモテ [front]" side of the spatula face-up and insert it into the tea case.
Make sure to align the holes of the spatula with the protrusions of the tea case.
2
Insert the lower mortar into the tea case. (
lower mortar with the protrusions, rotating the lower mortar slowly until it fits
2
securely. ( -b)
Lower mortar
Spatula
Make sure to face the
" オモテ (front)" of the
spatula upward
Tea case
3
Place the upper mortar unit onto the lower mortar.
Align "▼" of the upper mortar unit with the white line " " of the tea case.
Upper mortar unit
NOTE:
There are three ▼ on the upper mortar unit. Match any of them with the white line " "
of the tea case.
2
-a) Align the holes on the bottom of the
2
-a
Hole
1
E-21
2
-b
Bottom of the lower mortar
Protrusion
Match
Hole
Protrusion