Clock Display; Clock Setting; Auxiliary Input - Blaupunkt Montevideo 4010 DVD Operating And Installation Instructions

General Operation
- TREB F1-4
Display shows the TREBLE frequency.
F1=10K, F2=12.5K, F3=15K, F4=17.5K.
- BASS Q1-4
Display shows the BASS Q-Factor.
Change the sharpness of the Bass output.
The larger the Q-Factor, the sharper the BASS.
- MID Q1-4
Display shows the MIDDLE Q-Factor.
Change the sharpness of the Mid output.
The larger the Q-Factor, the sharper the MID.
- LOUD F1-3
Display shows the LOUDNESS frequency.
F1=400, F2=800, F3=2.4K.
Mode Button (SRC)
Press the SRC button to change between
TUNER (Radio), DISC (when disc is in), USB
(when USB is connected), CARD (when SD/
MMC card is in) or AUX (AUX-IN) play, etc.

Auxiliary Input

To access an auxiliary device:
1. Connect the portable audio player to the
AUX interface on the front panel.
2. Press the SRC button to select AUX-IN
mode.
6

Clock Display

Press DISP once or more to display clock time
for 5 seconds.

Clock Setting

1. Press DISP more than 2 seconds, hour
display blinks, then rotate the VOL/MENU
knob to set hour.
2. Press the VOL/MENU knob to confirm, and
minute display blinks, then rotate the VOL/
MENU knob to set minute.
3. Press DISP again to exit.
Menu Setting
Press the VOL/MENU knob more than 2 sec-
onds to enter into menu mode, then each
press changes the mode.
- EQ Mode
The Equalizer function applies preset sound
effects to the unit's audio output signal. Rotate
the knob to select EQ sound effect:
FLAT - CLASSIC - ROCK - POP - JAZZ - OFF
With the equalizer function activated, if bass or
treble is adjusted, the EQ Mode will revert to
"Off". When the equalizer function is activated,
the most recently selected bass/treble levels
cannot be adjusted. When the equalizer func-
tion is not active, the unit will return to the most
recently selected bass and treble levels.
- BEEP ON/ OFF Mode
The beep tone feature allows the selection of
an audible beep tone to be heard each time
the menu is accessed.
- 12 /24 HOURS Mode
12 HOURS MODE:
The clock displays in the type of 12 hours such
as 11:18 AM.
24 HOURS MODE:
The clock displays in the type of 24 hours such
as 20:18.
- AREA SET
This option allows you to select the appropriate
frequency spacing for your area.
Rotate the knob to choose USA or Europe.
- STEREO ON/OFF Mode
Selectable when the current source is Radio
mode.
This option allows you to select radio FM
mono/stereo.