Subscribe to Our Youtube Channel
Related Manuals for Primo Water 601177
Summary of Contents for Primo Water 601177
- Page 1 P R O F E S S I O N A L HEAVIER USE BOTTLED WATER DISPENSER Owner’s Manual #601177...
- Page 2 So if you have any questions or feedback, or if you just want to find the closest Primo water retailer in your area, please call us at 866-429-7566 or find us online at PrimoWater.com. Be sure to ask how you can save even more by joining Club Primo.
-
Page 3: Features & Functions Overview
Water Bottle – Not included. Uses 3, 4 or 5 gallon bottles. Go to www.PrimoWater. Register Online com to find 99.99% pure Primo Water at a store near you. • Do NOT operate dispenser in the presence of explosive fumes. -
Page 4: Assemble
Locate Dispenser hot and cold tanks. It will take up to 12 minutes to fill the tanks for the Dispensing Hot Water (185°F – 210°F) MAINTENANCE first time. During this period the pump will run continuously. This is 1. Place dispenser upright. For best taste, performance and hygiene: normal. -
Page 5: Limited Warranty
LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FURTHER, VENDOR Primo Water Corporation, (“Vendor”) warrants to the original purchaser SHALL HAVE NO LIABILITY WHATSOEVER TO PURCHASER OR ANY of this dispenser, and to no other person, that if this dispenser is...
Need help?
Do you have a question about the 601177 and is the answer not in the manual?
Questions and answers
How to feel it up it’s not pumping water
To refill the Primo Water dispenser (part number 601177) when it is not pumping water:
1. Check if the bottle is empty – A flashing red light indicates the bottle is empty.
2. Replace the bottle – Remove the empty bottle and place a fresh 3, 4, or 5-gallon bottle outside the cabinet.
3. Reset the dispenser – Unplug the dispenser, remove the bottle, and call 866-429-7566 for assistance if the issue persists.
Ensure the dispenser is on a hard, flat, and level surface and positioned at least 4 inches from the wall for proper airflow.
This answer is automatically generated
where is the fuse location on premo hot and cold water despenser?
The fuse is located on the back of the Primo Water 601177 hot and cold water dispenser.
This answer is automatically generated
My water dispenser is leaking water. Where would the leak be coming from? #601177
My model number is 601178 .I can't find my model
Why can't I find my model number
Reset clock 601264