Advertisement
PRIMARY AND SECONDARY
HEAT EXCHANGER
IN-SHOT BURNERS
PRESSURE SWITCHES
CONTROL BOARD
STANDARD EQUIPMENT
Completely assembled and wired; blocked drain sensor, 7
segment LED and marked hoses; heat exchanger; primary:
aluminized steel, secondary: 29-4C stainless steel; 2 stage
induced draft; pressure switches; redundant 2 stage main gas
control; blower compartment door safety switch; solid state
time on/off blower control; limit controls; manual shut-off
valve; 100% safety lock out; cool fan off delay; field selectable
heat fan off delay; one hour automatic retry; power and self-
test diagnostics; flame sense current diagnostics; electronic
air cleaner connections; twinning (built-in) features; humidifier
connections; humidifier on/off delay; low speed continuous fan
option; single speed option for heating and cooling applica-
tions; transformer; direct drive, variable speed electrically
commutated blower motor (ECM). Solid bottom. (Please note:
a thermostat is not included as standard equipment.)
REMOTE
SENSOR
ECM MOTOR
OPTIONAL EQUIPMENT
Side and bottom filter racks; return air cabinet for all sizes.
NOTE: Furnace is not listed for use with fuels other than natural
All models can be converted by a qualified distributor or local
service dealer to use L.P. (propane) gas without changing burn-
ers. Factory approved kits must be used to convert from
natural to L.P. (propane) gas and may be ordered as optional
accessories from a parts distributor.
For L.P. (propane) operation, refer to Conversion Kit Index Form.
Air
DIRECT SPARK IGNITION &
REMOTE SENSOR
GAS VALVE AND MANIFOLD
BLOCKED DRAIN
SENSOR
or L.P. (propane) gas.
WARNING
THIS FURNACE IS NOT APPROVED
OR RECOMMENDED
FOR USE IN MOBILE HOMES
Standard & Optional Equipment
R96V Series
DRAFT
INDUCER
Hide quick links:
Advertisement
