Advertisement
Verification Checklist
Did the NAM's OK LED light? If not, see
Troubleshooting
Symptom
No power.
If you are still having problems with the power supply, contact your service
representative.
Power Failure Recovery
In cases of loss and restoration of nominal voltage conditions, this product
automatically restores to service without manual intervention.
Copyright
1998 Paradyne Corporation
Troubleshooting
Possible Cause
The power cord is not
securely plugged into the
wall receptacle, or is not
connected to the power
inlet at the rear of the
housing.
The wall receptacle has no
power.
Power supply is not fully
inserted into the housing.
Power supply is defective.
*9000–A2–GN1A–10*
4
.
Solutions
Check that the power cord
is securely attached at both
ends.
Check the wall receptacle
power by plugging in some
equipment that is known to
be working.
Check the circuit breaker.
Reinstall the power supply,
making sure that you gently
push it all the way into the
housing.
Replace power supply.
Advertisement
