Replacing The Propeller Blades; Troubleshooting - Brookstone FLIGHTFORCE Manual

REPLACING THE PROPELLER BLADES

The Micro Drone's propeller system is a precision instrument
that may need repair or replacement for optimal flight
function. Crash landing from high-speed aerial flights may
cause damage to your Micro Drone's propellers.
1 . The Micro Drone has four blades, two gray propellers on
the front, and two black propellers on the rear . Both the
blades and the Micro Drone are labeled with an
embossed A or B as shown in figure S .
2 . When replacing the propeller blades (included), gently
remove the blade from the rotor shaft . Make sure to
match both the color of the blade and the indication
letter on the blade with the letter on the HD Video Drone .
3 . Replace the damaged blade with the new blade .
Gray Blade Front Left=A
Gray Blade Front Right=B
Black Blade Rear Left=B
Black Blade Rear Right=A
40
Front
B
A
Fig. S
Rear
B A

TROUBLESHOOTING

ISSUE SOLUTION
No power
Switch the ON/OFF switch to ON .
(controller)
Make sure all batteries are installed
correctly (see diagram B on page 18) .
Replace batteries .
No power Recharge the Micro Drone .
(Micro Drone)
Controller not
Switch the ON/OFF switch to ON on
the controller .
responding
Switch the ON/OFF switch to ON on
the Micro Drone .
Conditions are too windy .
Replace batteries .
Micro Drone not Calibrate gyro (see instructions on page
37) .
responding
41