Preparing For Flight - Brookstone FLIGHTFORCE Manual

4 . Push the THROTTLE CONTROL STICK all the way
forward (one beep will sound) and then pull the
THROTTLE CONTROL STICK all the way back . A
second beep will sound and the FRONT AND REAR
LED INDICATORS will be solid, indicating the controller
and the Micro Drone are successfully synced . If not,
repeat above steps .
FOR MULTI-PERSON PLAY
5 . Before starting, make sure that the power switches on
both the controller and the Micro Drone are in the OFF
position . Make sure that there are no other 2 . 4 G devices
in the area .
6 . Each person needs to sync their Micro Drone at a
different time to avoid interference . Follow steps 1 to 4
above ensuring that no one else is syncing at the same time .
7 . After syncing, each player's Micro Drone should be left ON
until all players have synced their Micro Drones .
8 . Should there be interference, all players must turn off their
controllers and Micro Drone for up to 60 seconds and then
begin the syncing process again .
22

PREPARING FOR FLIGHT

1 . Verify that there are 2 AAA batteries inside the remote
control unit and the Micro Drone has been fully charged .
2 . Confirm your Micro Drone and controller are both
turned on .
3 . Make sure to be in a large space with an open radius of
at least 50 feet .
4 . Make sure the empty space has no obstacles or water
close by .
5 . Place the Micro Drone on a clean, flat surface before
take-off .
CAUTION: DO NOT ATTEMPT TO FLY THE MICRO
DRONE IF THERE IS RAIN, SNOW, HEAVY WINDS,
THUNDER OR LIGHTNING OUTDOORS. IT COULD
DAMAGE YOUR PRODUCT AND MAY CAUSE BODILY
HARM.
23