Replacing The Shaving Unit - Philips S9531 Quick Start Manual

ENGLISH
32

Replacing the Shaving Unit

Q Replace the shaving unit once a year for
optimal shaving results.
Q Replace damaged or worn shaver heads with
model SH90 Philips Norelco shaver heads
only.
Replacement Shaver Head Assembly
Indication
C
Q The shaving unit symbol lights up continuously,
the arrows blink and you will hear a beep
when the shaver is turned off to remind you
to replace your shaving unit to obtain optimal
shaving results.
C
1 Pull the top portion of the shaving unit
straight off the shaver.
C
2 Place the retaining ring holder on the
retaining ring (1), turn counterclockwise
3
(2) and lift it off the shaving head (3).
1 2
3 Remove the retaining ring from the
retaining ring holder and repeat the
process for the other retaining rings.
C
4 Remove the shaving heads from the
shaving head holder and discard.
DO NOT discard the retaining ring.
C
5 Place new shaving heads in the holder.
Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in
the shaving head holder.
C
6 Place the retaining ring holder on the
retaining ring (1), place it on the shaving
1
head (2) and turn clockwise (3) to reattach
the retaining ring.
2 3
C
NOTE: Each retaining ring has two recesses that
fit exactly into the projections of the shaving
head holder. Turn the ring clockwise until you
hear a click to indicate the ring is fixed into
place.
7 Repeat this process for the other retaining
rings.
C
8 Hold the shaving head holder in your hand
1
and place the retaining ring on the shaving
2
head holder (1). Turn clockwise (2) to
reattach the retaining ring.
Do not place the shaving head holder on a
surface, as damage may occur.
ENGLISH
33