Samsung VP-L100 Service Manual page 53

Alignment and adjustment
5-2-4 LCD Adjustment
5-2-4 (a) PREPARATION
Note 1 : 1) The LCD adjustment is possible by using the each key of unit.
2) The value completed adjustment are stored at ICL202(EEPROM).
3) When finish adjustment, it is needed to off the power to store adjusted value.
4) After each adjustment step is completed, OSD shows ÒCOMFIRM!Ó
1. How to select the LCD adjust mode.
STEP 1
1. Connect the power (battery or power cable).
2. Switch to ÒVIDEOÓ mode.
3. Set OSD on state.
LCD
0A VCO
EPR:XX EVR:XX
5-32
TV OSD
STEP 2
1. Press and hold ÒFFÓ and ÒTAPE EJECTÓ buttons on
the unit for more than 3~4 seconds simultaneously.
2. There is OSD on screen as below.
On screen display shows "0A VCO EPR:XX
EVR:XX" LCD adjustment mode has successfully
been activated.
Note : ÒXX XXÓ indicates variable values.
FF BUTTON
CAMERA/VIDEO
SELECT SWITCH
D IG
TAPE EJECT
M
O O
L Z
IT A
8
H i
Samsung Electronics