GE af-600 fp Quick Manual page 30

About Programming AF-600 FP Quick Guide
6.2 Remote Programming with DCT-10
GE has a software program available for developing,
storing, and transferring drive programming. The allows
the user to connect a PC to the drive and perform live
programming rather than using the keypad. Additionally,
all drive programming can be done offline and simply
downloaded to thedrive. Or the entire drive profile can be
loaded onto the PC for backup storage or analysis.
The USB connector or RS-485 terminal are available for
connecting to the drive.
6 6
For more details, please go to www.geelectrical.com/drives.
DET-759A 29