Olympus Stylus 1050 SW Instruction Manual page 56

ng OLYMPUS Master 2
System requirements and
installation of OLYMPUS
Master
~_ .~
Install the OLYMPUS Master 2 software by
referring to the included installation guide.
Connecting the camera to a
comRut~r;,
1
Make sure the camera is turned off.
• The monitor is off.
2
Connect the camera to a computer.
• The camera automatically turns on.
(fJ
Locate the position of the USB port by
referring to your computer's instructions
manual.
3
Use
~~
to select [PC], and press
the
@
button.
• The computer automatically detects the camera as
a new device on the first connection.
Windows
After the computer detects the camera, a
message indicating the completion of the
setting appears. Confirm the message and
click "OK". The camera is recognized as a
removable disk.
Macintosh
When iPhoto started, exit iPhoto and start
OLYMPUS Master 2.
" While the camera is connected to the
computer, shooting functions are disabled.
• Connecting the camera to a computer via a
USB hub may cause unstable operation .
0)
When [MTPj is set for the submenu that
appears by pressing
n
after selecting [PC]
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
1
Double-click the OLYMPUS Master 2
icon • .
Windows
• appears on the desktop.
Macintosh
.~
appears in the OLYMPUS Master 2 folder.
• Browse window appears after starting the
software.
t1J
When you start OLYMPUS Master 2 for the
first time after installation, "Default Settings"
and "Registration" screens appear. Follow
the instructions on the screen.