SECUDRIVE USB Copy Protection User Manual page 18

[Image File Settings]

Project Folder: Folder that saves the login program and the image file which will be copied
to the USB.

Content Folder: Folder that saves content which will be accessed by a user.

Volume Name: Set a name of the drive that will be executed as a virtual drive being
connected from the image file.

Image Name: Name of the image file created.

Free Space: Available space for creating an image file. A created image file cannot exceed
the available space. The available size of the disk is displayed.

Content Size: The size of the Content Folder.

Image Size: The size of the virtual drive. This valued is set automatically and can be
changed manually. You cannot set the size which is smaller than that of "Content Folder".
[Create Image File]

Elapsed Time: The elapsed time after starting creation of the image file.

Create: Click this button and image creation will start. When finished, you can see the
"Login.exe" file and the "System" folder in the "Project Folder".
SECUDRIVE USB Copy Protection User Guide
18