Policy - SECUDRIVE USB Copy Protection User Manual


You can change the splash image that is displayed when logging in/out.

Check the box and select an image to replace. A splash image should be in BMP format
with 248 x 137 pixel.

If the box is not checked, the default splash image is displayed as follows.

2.5 Policy

[ Verification Code Settings]

Content is accessible only when the verification code of an image file matches with the one
set in the USB flash drive. In other words, when the administrator sets a verification code
for an image file, content is only available on a USB flash drive which has been created by
the administrator.

An image file with verification code is protected against unauthorized copying. If another
administrator created a USB flash drive using SECUDRIVE USB Copy Protection Manager
and copied the image file to the device, the content would not accessible.
SECUDRIVE USB Copy Protection User Guide
11