SECUDRIVE USB Copy Protection User Manual page 14

[Image File Access]

Read-only: The image file is connected as a read-only virtual drive.

Read/Write: The image file is connected as a read/write virtual drive.
[Login Settings]

Auto login: A user can access content without password input.

Set password by user: A user sets a password at first use.
Set a user's password: A user connects an image file to a virtual drive by entering the

password set by the administrator.
[Autorun Process Setting]

Process Name: The designated process will be automatically run after logging into the
USB flash drive. Click
Path: Set a path for the process set in "Process Name". If the process is located in the root

folder of the virtual drive, leave this filed blank. For example, to run the "\start\Start.exe"
process on the virtual drive automatically, the process name should be "start.exe" and the
path is "＼start＼".
SECUDRIVE USB Copy Protection User Guide
and select a file to execute.
14