Hunter Key Biscayne Owner's Manual page 14

Switch Housing & Light Kit (continued)
Housing
Assembly
Partially install two switch housing
assembly screws ,found in
the hardware bag, into the motor
housing as shown. It does not matter
which two screw holes you choose.
Switch
Screw
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the two screws
and twist counterclockwise to lock the
M3556-01 • 06/17/14 • © Hunter Fan Company
upper switch housing into place.
14
www.HunterFan.com
Insert the third screw, found in
the hardware bag, into place and
then tighten all three screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
1.888.830.1326