JVC AV28WT5EPS Service Manual page 27

Measuring
Item
instrument
Adjustment Remote
of SUB control unit
COLOURⅠ Ⅰ Ⅰ Ⅰ
Test point Adjustment part
5.COLOUR
(PAL～ ～ ～ ～ NTSC)
PAL COLOUR
SECAM COLOUR
Only
AV28WT5EPS
AV24WT5EPS
NTSC COLOUR
No. 51776
Description
[Method of adjustment without measuring instrument]
(PAL COLOUR)
1. Receive PAL broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 5.COLOUR with the FUNCTION UP/DOWN key.
4. Set the initial setting value for PAL COLOUR with the
FUNCTION - or + key.
5. If the colour is not the best with the initial set value, make
fine adjustment until you get the best colour.
6. Press the MENU key and memorize the set value.
(SECAM COLOUR)
1. Receive a SECAM broadcast.
2. Make fine adjustment of SECAM COLOUR in the same
manner as for above.
(NTSC 3.58 COLOUR)
1. Input a NTSC 3.58MHz COMPOSITE VIDEO signal from the
EXT terminal.
2. Make similar fine adjustment of NTSC 3.58 COLOUR in the
same manner as for above.
(NTSC 4.43 COLOUR)
1. When NTSC 3.58 is set, NTSC 4.43 will be automatically set at
the respective values.
AV28WT5EPS AV24WT5EPS
AV28WT5EIS AV24WT5EIS
AV28WT5EKS AV24WT5EKS
27