JVC AV28WT5EPS Service Manual page 26

AV28WT5EPS AV24WT5EPS
AV28WT5EIS AV24WT5EIS
AV28WT5EKS AV24WT5EKS
Measuring
Item
instrument
Adjustment Signal
of WHITE generator
BALANCE
(High Light) Remote
control unit
REMOTE CONTROL UNIT
1 2
4 5
7 8
Adjustment Remote
of control unit
SUB BRIGHT
Adjustment Remote
of control unit
SUB CONT.
26
Test point Adjustment part
2.DRIVE
(R)＊＊＊
(B)＊＊＊
3
▲
DRIVE(R)
▲
DRIVE(B)
6
DRIVE(R) ▼
9 DRIVE(B)
3.BRIGHT
4.CONT.
" The adjustment for Low Light WHITE BALANCE should be
finished.
" Set the PICTURE MODE to NORMAL.
1. Receive a black and white signal (colour off).
2. Select 2.V/C from the SERVICE MENU.
3. Select 2.DRIVE with the FUNCTION UP/DOWN key.
4. Change the screen colour to white with 4 key or 7 key (Drive of
Red), 6 key or 9 key (Drive of Blue).
5. Press the MENU key, and memorize the set values.
▼
1. Receive any broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 3.BRIGHT with the FUNCTION UP/DOWN key.
4. Set the initial setting value with the FUNCTION -/+ key.
5. If the brightness is not the best with the initial setting value,
make fine adjustment until you get the best brightness.
6. Press the MENU key and memorize the set value.
1. Receive any broadcast.
2. Select 2.V/C from the SERVICE MENU.
3. Select 4.CONT with the FUNCTION UP/DOWN key.
4. Set the initial setting value with the FUNCTION - / + key.
5. If the contrast is not the best with the initial setting value, make
fine adjustment until you get the best contrast.
6. Press the MENU key and memorize the set value.
No. 51776
Description