P r o g r a m m e s e t t i n g s
Not all buttons and their functions can be selected in all programmes.
ü Level ^ :
Cupboard Dry Plus
Finish in 5
Explanations and information
Select the dryness level depending on the required degree of
If you have selected a dryness level, this will be stored for the
selected programme even after the appliance has been
switched off. Exception: The settings will not be saved for Cot-
Multi-layered, thick laundry that does not dry readily.
Normal, single-layered laundry.
Normal, single-layered laundry that still needs to be damp after
drying and is suitable for ironing or hanging up.
If you think the laundry is still too damp when the drying pro-
gramme has ended, you can adjust the degree of dryness to
achieve a particular dryness level. To increase the dryness level,
Ô Ô Ô
set the degree of dryness to between Ô and Ô Ô Ô. This will
extend the programme duration but the temperature will remain
Once you have adjusted the degree of dryness for a pro-
gramme, this setting will be retained for the programme even
after the appliance has been switched off.
‚ - ƒ...
Before starting the programme, you can preselect the pro-
gramme end time ("Ready in" time) in hourly increments (h =
hour), up to a maximum of 24 hours:
Select a programme.
The programme duration will be displayed for the selected
programme, e.g. ‚:...† (hours:minutes).
Press Finish in 5 repeatedly until the required number of
hours is displayed.
ting values, and the Finish in 5 – button to reduce them.
Press Start/Pause Ü.
This activates the time delay.
Before the programme starts, the selected number of
hours (e.g. ‰) is shown on the display and counts down
until the drying programme starts. The duration of the pro-
gramme will then be displayed.
Use the Finish in 5 + button to increase the set-
The programme duration is included in the "Ready in"