Windows 2000 Environment - Acard AEC-6280 User Manual

ACARD AEC-6280

4.1.3 Windows 2000 Environment

Driver installation is required when it is the first time to set up Windows
2000 on the computer.
Boot Device
AEC6280.SYS is designed for Microsoft Windows 2000 miniport drivers. It
allows a driver to be connected to an IDE device supported by Microsoft.
1. Insert the Windows 2000 boot disk and boot from the floppy disk.
(If you boot from CD-ROM or hard disk, please press "F6" on the first
booting screen.)
2. Follow the Windows 2000 setup procedures.
3. Press "S" to specify additional SCSI adapter.
4. Move the highlight bar to "the other" and press "Enter".
5. Before installation, copy the AEC-6280's driver into a floppy disk.Then
insert the ACARD AEC-6280 driver disk into drive A. Refer to Appendix 2.
6. The ACARD Miniport driver should be highlighted at this stage. Press
"Enter" to proceed.
7. Windows 2000 will now recognize the ACARD miniport driver and the
IDE hardware. Please follow the Microsoft Windows 2000 installation.
Install the Driver for Windows 2000
After installing Windows 2000, you can set up the ACARD AEC-6280 de-
vice in the operating system. Follow the procedures below to install the
ACARD AEC-6280 driver manually.
23