Description Of The Appliance; Putting Into Operation - Boneco 2055A Instructions Manual

13
14
15

Description of the appliance

Air inlet
Cover
Control panel
Air outlet
1 disc pack with
16 humidifying discs
Rotary lock
Fragrance container
and rotary lock opener
for humidifying discs
Water base

Putting into operation

The best location for your appliance is:
• On the floor, or on a level, dry surface in the room.
• Pay proper attention to easy accessibility and sufficient
space for servicing and cleaning the unit.
• Read the section «Filling the tank» on how to fill the
water tank (16 – 20).
• Place the water tank on the lower part (20).
• Connect the power cable to the outlet and switch the
appliance on using the On/Off switch.
• The unit will reach full humidity output about 10 –
15 minutes after you switch it on.
• Ensure that the cable is not trapped (9). Do not switch
on the unit if the cable is defective (2).
Water tank
Water tank cap
Hydro Cell
en
9