Before Installing This Product; Speaker Mounting Suggestions - Boss Audio Systems ATV30BRGB Quick Start Manual

this product. To avoid short-circuiting, cover any disconnected leads with insulating
tape. It is especially important to insulate any unused wires, which if left uncovered
may cause a short circuit. When connecting other devices to this product, refer to
the manual for the product to be connected. The black cable is ground, make sure
to metal parts of the vehicles body frame or direct to the battery if your vehicle
does not have a grounded chassis frame The ground wire of this units power amp
and a second powered system must be connected to the frame separately with
Route strap
through the hole
and to vehicle
frame
Mounting straps should be double checked to be sure they are
pulled tight and secure before each use of the vehicle.

BEFORE INSTALLING THIS PRODUCT

SPEAKER MOUNTING SUGGESTIONS

Route strap
around the speaker body to vehicle frame
CAUTION!!
To avoid potential shorts in the electrical
tery cable before installation. Use this unit
ing only. Failure to do so may result in a
-
-
Route strap
through the hole
and to vehicle
frame