Priming The System - Direct Color Systems 1024uvmvp Getting Started Manual

Priming the System

If you have not installed Color Byte RIP 9.1, please ensure the software is
installed prior to
Guide folder on the orange security device.
The Direct Jet 1024UVMVP printer ships with a USB cable for connection between the printer and
computer. Connect one end of the USB cable to the USB Connector on the printer and connect the
other end to an available USB port on the computer.
Raise print engine to its maximum height
Open Color Byte RIP 9.1 and go to the Queue Manager by selecting Queue > Manage Queues
from the drop down menu.
In the dialog box, under the Port column, select EPSONStylus Photo R2000_USB***. When
prompted, select YES to set this port for all queues.
Close the Queue Manager and Open the Device Properties
DCS_Direct_Jet_1024UVMVP
continuing. Refer to the Software Guide found in the User's
_Getting_Started_Guide_1.2_030314
Go to table of contents
23 | P a g e