Table of Contents
Advertisement
VLAN Configuration
The VLAN Configuration feature lists the currently defined VLANs and the ports assigned to each.
To add VLAN groups:
1.
Enter the VLAN ID (1-4094) for the VLAN you want to configure in the VLAN ID field at the bottom
right of the screen and click Add. The new VLAN group will be displayed in the VLAN ID column.
2.
Once you have created a new VLAN ID click on VLAN Membership to add ports to the group. See
"VLAN Membership" on page 3-3
To delete a VLAN group:
1. Select the boxes for the VLANs to be deleted. Selecting the box at the top of the column will select all
VLAN IDs.
2. Click Delete. The selected VLAN groups will be deleted.
VLAN Membership
To add ports to a VLAN group:
1.
Select VLAN Membership from the menu on the left. The VLAN Membership screen displays.
2.
Select the VLAN group you want to configure from the VLAN Identifier pull down list
3.
Check the boxes for the ports you want to add to the VLAN group. You can use the Group Operation
commands to add all ports or clear the current selections.
Note: Some switches allow Port Tagging to be done on the VLAN Membership screen. If so the port check
boxes will allow you to select U (un tagged) or T (tagged) in addition to adding the port to the VLAN
group. This will cause the data for an individual port to be tagged (associated) with a VLAN group.
See
"Port Tagging" on page 3-4
4.
Click on Apply. Return to the VLAN Configuration screen to verify your selections.
Port PVID
A Port Default VLAN ID (PVID) is a VLAN ID tag that the switch will assign to data packets it receives
that are not already addressed (tagged) for a particular VLAN group. If you have a PC on port 6 and you
want it to be a part of VLAN group 2, you would configure port 6 to automatically add a PVID of 2 to all
data received from the PC. This will ensure that the data from the PC on port 6 can only be seen by other
members of VLAN group 2.
You can only assign one PVID to a port.
To assign a PVID to a port:
1.
Select a switch.
2.
Select VLAN > 802.1Q > Advanced > Port PVID. The Port PVID screen displays.
3.
Select the port you want to configure.
Virtual LAN Configuration
ProSafe
Plus Switch Configuration Utility User Guide
®
v1.0, February 2010
3-3
Hide quick links:
Advertisement
Table of Contents
