Default Settings - NETGEAR ProSafe Plus User Manual

ProSafe Plus Switch Configuration Utility User Guide
®

Default Settings

All of the ProSafe ® Plus Switch features have default settings. You do not need to configure any settings in
order to use the ProSafe ®
The following table lists the default values for switch settings. Shaded features are not configurable on all
switches.
Table 1-1. Feature Default Values
Tab Menu
System
Status
Maintenance
Monitoring
1-8
Plus switches.
Feature
Switch Selection
Names
Passwords
Switch Information
DHCP Mode
IP Address
Subnet Mask
Gateway Address
Change Password
Device Reboot
Factory Default
Firmware Upgrade
Port Statistics
Mirroring
Cable Tester
v1.0, February 2010
Default Value
No switch selected
All names blank
"password" for all switches
Enabled
192.168.0.239
255.255.255.0
192.168.0.254
All fields blank
Unchecked
Unchecked
Filename blank
0
Disabled
OK or No Cable for each port
Getting Started