Setting An Admin Password - SAGEMCOM Bell Reference Manual

The Connection Hub's printer USB functionality is available for use.

Setting an admin password

An Admin Password is used for security. If you do change your Admin
Password, be sure to write it down and keep it handy for future reference.
Once you have set an Admin Password, you will need to enter it in before
making any changes to the Connection Hub settings.
1. Open your web browser.
2. Type 192.168.2.1 in the address bar, then press Enter. If you are
prompted to enter in a username and password, these are set to the
following defaults:
Username: admin
Password: admin
If you have changed the default password, you must enter in that
password.
3. Click on Account Settings from the left menu.
4. Type in your current password in Current Password ("admin" is the
default password if you have not already changed it).
Type in a new password in both the New Password and New Password
5.
(again) fields.
6. Click Save. 11