Know What The Presser Feet Will Do; Check Your Presser Foot; Change The Presser Foot - Janome mystyle 16 User Manual

SECTION 2.
PREPARE YOUR MACHINE FOR SEWING
Know What the Presser Feet Will Do
.
Check Your Presser Foot *Change
the Presser Foot
The Presser feet are an important feature of this machine. You need to know
Use the correct presser foot for the stitch you wish to sew. Consult the
what each f oot does in order to use them effectively.
Stitch Pattern Chart and the detailed directions for sewing with the various
Your presser foot is held in place by a Foot Holder. Each presser foot merely
presser feet.
snaps on the foot holder, which is seldom removed.
If you need to remove or attach the foot holder, here is what you do.
To Remove:
To Attach:
To Snap Off:
Presser bar fF
npn
I
oIf
Foot
~t
holder
>'
To Remove:
To Attach.
To Snap Of f the Presser Foot:
Turn the screw toward the back of
1. Match the hole in the foot 1.
Raise the needle bar to its highest position by turning the hand wheel
the machine. Use the large screw
holder with the threaded hole in toward you.
driver. the presser bar.
2. Raise the presser foot.
2. Fit the foot holder screw into 3. Press the snap-on button on the back of the foot holder. The presser
the hole.
foot will drop off,
3.
Tighten the screw by turning it
toward you.
9