Insert The Bobbin Into The Bobbin Holder - Janome mystyle 16 User Manual

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Prepare the Bobbin (Continued)
*Insert the Bobbin into the Bobbin Holder
___
B
1. Put the bobbin into the bobbin 2. Pull about 10 cm of thread 3. Then pull the thread clockwise 4, Slide the bobbin cover plate while
holder so that the thread feeds toward you through the tension
toward the back of the machine pushing it down slightly over the
counter-clockwise (left),
slot
.A
through the slot
.bobbin.
Allow about 10 cm of
thread to show above the needle
plate.
14