Stitch Selector - Janome mystyle 16 User Manual

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Stitch Selector
For Zigzag Stitch
In the correct zigzag stitch, the bobbin threads will not show on top of the
fabric and the top threads will show slightly on the under side. See below for
j
the correct appearance. To match this appearance, adjust your top thread
r uLj
tension.
c cocos
0- 0
/~Stitch
Red
indicato
The stitch selector control determines the stitch you select.
Too Tight Too Loose
Just
Right
Simply turn this control until the desired stitch is indicated by the red indicator
on the stitch indicator panel. The bottom row of stitches is selected when the
stitch length control is set at the stretch stitch position.
NOTE: To avoid needle or fabric damage, be sure your needle is up and out of
fabric when selecting a stitch.
Stitch patterns are color-coded to recommend setting zones at the stitch length
control.
ZONES
NWp S ie cf F~ar,, Under Sick of F
2
Lbr;
Topl Side of Pahr;:
*
Pink ..........
.
Straight, Zigzag and Utility Stitches
Too Tight
Too Loose
*
Blue ........... Built-in Buttonhole Making
- The points of
the
The top thread .
Yellow ........
Stretch Stitches
zigzag will puIl wilt loop
tfhoU'gh
together on top of the poitrs on the
tile stitch. bottom of the
stitch and W'I be
pulled
almost
together
18