First Time Installation; Changing Channels; Adjusting The Volume; Volume Up / Down - Bush DVB-T2 PVR User Manual

First Time Installation

IMPORTANT: Ensure that the aerial is connected
before switching on the set top box for the first
time.
When the set top box is operated for the first time,
installation wizard will guide you through the process.
First, TV Type selection on-screen menu will be
displayed:
By pressing the " "/" " buttons select the Tv type you
want to set and press OK button. Afterwards, "Select
HDMI resolution" OSD will appear on the screen.Select
your desired resolution by pressing " "/" " button and
press OK.
Then "Do you want to start an automatic channel
scan?" pop-up menu is displayed. Auto search can
be started by selecting the "Yes" button. The box will
automatically find the channels and store them.
• To start installation process, select Yes by using
" "/" " buttons and then press the OK button.
• The box will start to search available stations. The
progress bar will move along the line. You should
allow the set top box to complete the search to store
all available stations.
Note: You can press MENU button to cancel.

Changing Channels

• You can change channels with the following
methods.
• You can press the numeric buttons (0–9) to directly
enter the channel number. You can press numeric
buttons consecutively to enter two or more digits.
• Press the P +/ P - buttons to move up or down to the
next available channel.
Note: You can press OK button to display the channel
list.

Adjusting the Volume

Volume Up / Down

• You can increase or decrease the volume by using
V+ / V- buttons.
• The volume level selected will remain set, even when
the receiver is turned off and on again, until you change
volume again.
• The audio volume adjustment for the receiver is
independent of the volume control on your TV set.
IMPORTANT: You should be careful that both volume
controls are kept within reasonable levels so that when
switching on, or when first turning on your TV set, the
sound level is not too high.

Mute

• You can press
top box. The sound will be muted once this button
is pressed.
- 11 -
to mute the sound of your set