Stihl FS 55R Instruction Manual page 24

English
Symbol on slide control
7 h – stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (h) to STOP-0.
Starting
N Press down the trigger lockout lever
and squeeze the throttle trigger.
N and hold them in that position.
N Move the slide control to START
and hold it there.
N Now release the throttle trigger,
slide control and trigger lockout in
that order. This is the starting
throttle position.
N Go to "All versions".
22
Version with loop handle
Controls
7 1 6
3
5 4
1 Stop switch
2 Throttle trigger lockout
3 Throttle trigger
4 Tongue of throttle trigger
5 Catch
Positions of stop switch
6 I – normal run position – the engine
can start or is running
7 0 – Stop – engine off – the ignition is
switched off
Starting
2
N Move the stop switch to I.
N Press down the throttle trigger
lockout and hold it there.
N Squeeze the throttle trigger until the
catch on the tongue (4) can be
engaged on the housing.
N Now release the throttle trigger,
tongue and trigger lockout in that
order. This is the starting throttle
position.
N Go to "All versions".
FS 55, FS 55 C, FS 55 R, FS 55 RC
4