COMFORT
REAR SEATS
Bench seat with fi xed one-piece cush-
ion and split backrest (left hand 2/3,
right hand 1/3) which can be folded in-
dividually to adapt the load space in the
boot.
Rear head restraints
These have a high position (comfort)
3 3
and a low position (rear visibility).
They can also be removed.
To remove a head restraint:
release the backrest using control 1 ,
tilt the backrest 2 slightly forwards,
pull the head restraint upwards to
the stop,
then, press the lug A .
Never drive with the head re-
straints removed; they must be
in place and correctly adjusted.
52
Folding the backrest
Move the corresponding front seat
forward if necessary.
Check that the seat belt is positioned
correctly on the side of the seat back.
Place the head restraints in the low
position.
Pull control 1 forwards to release
the seat back 2 .
Fold the seat back 2 on to the cushion.
Repositioning the seat backrest
When repositioning the rear seat backrest:
Straighten the seat back 2 and se-
cure it.
Check that the red indicator, located
next to the control 1 , is no longer vi-
sisble.
When
repositioning
backrest, take care not to trap
the seat belts.
the
seat