ParaBody GS4 User Manual page 22

FIGURE 21
3/8 X 1-3/4" 11
7
35
19
6 3/8 X 3-3/4"
35
24
AN
19
C
STEP 21:
• Route the LOW CABLE (AN) around one 3-1/2" PULLEY (35) and assemble the PULLEY to the PULLEY BRACKET (Z)
using one 3/8 X 1-3/4" BOLT (11) and one 3/8" LOCK NUT (19) as shown in FIGURE 21.
• Route the LOW CABLE (AN) throught the BASE PLATES (C) and assemble one 3-1/2" PULLEY (35) to the BASE PLATES (C)
using one 3/8 X 3-3/4" BOLT (6), two 15/16" SPACERS (24) and one 3/8" LOCK NUT (19). See FIGURE 21.
22