Main Board Top Side; Main Board Bottom Side; Controls And Switches; Receiver Front End - Motorola GP Series Service Manual

Professional radio uhf2 (450 - 527mhz)
Hide thumbs Also See for GP Series:
Table of Contents

Advertisement

1.0
Allocation of Schematics and Circuit Boards
1.1

Controller Circuits

The UHF circuits are contained on the printed circuit board (PCB) which also contains the Controller
circuits. This Chapter shows the schematics for the UHF circuits only, refer to the Controller section
for details of the related Controller circuits.The PCB component layouts and the Parts Lists in this
Chapter show both the Controller and UHF circuit components. The UHF schematics and the
related PCB and parts list are shown in the tables below.
1.2

Voice Storage Facility

The Voice Storage facility is fitted to the GP1280 radio as standard and the schematics, component
layout and parts list for these circuits are shown in this Chapter. The Voice Storage facility may be
fitted to other radios in the GP Series as an option board; reference must be made to the Option
Board manual in this case. The Voice Storage schematic and the related PCBs are shown in Tables
4-2, 4-3 and 4-4 below.
PCB : 8480450Z03
SCHEMATICS
Parts List
UHF PCB/SCHEMATICS/PARTS LISTS
Table 4-1 UHF Diagrams and Parts Lists

Main Board Top Side

Main Board Bottom Side

Controls and Switches

Receiver Front End

Receiver Back End

Synthesizer

Voltage Controlled Oscillator

Transmitter

Page 4-5
Page 4-6
Page 4-7
Page 4-8
Page 4-9
Page 4-10
Page 4-11
Page 4-12
Page 4-13
Chapter 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents