Sensor Access X-PIN Install Manual page 4

X‐PIN & X‐PROX
Install Guide
DELETING CODES
When deleting a user slot, both the primary code and the secondary code are erased.
1) Enter the programming mode.
2) Depress 8 to enter Menu 8.
•
The Mode indicator will turn red.
3) Enter the 3‐digit user slot code to be deleted.
• The Mode indicator will flash red, indicating the controller is waiting for a programming code
to confirm the deletion.
If the user slot is empty, a long beep will be heard and the controller will return to its
normal mode.
4) Enter your programming code to confirm the deletion. If the programming code is valid, three beeps will be
heard
and the controller will return to its normal mode.
If the programming code is invalid, a long beep will be heard and the controller will return to its normal mode.
For the full User Manual please go to:
public.sensoraccess.co.uk
Sensor Access Technology Ltd
Sensor House
10‐11 Lewes Road
Brighton
East Sussex
BN2 4JZ
Tel: 01273 242 355
Fax: 01273 235 030
support@sensoraccess.co.uk
www.sensoraccess.co.uk