Acer B223W Service Manual page 11

Acer
[MENU]
[►], [◄]
[e Color ]
[POWER]
5.3
Hot Key Operation
AUTO
FUNCTION
FACTORY MODE
5.4 tructure
OSD S
The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD buttons or remote control
unit. The unit shall leave the factory with all OSD controls set to their default values.
First Second
Contrast
Brightness
Brightness
A. When OSD isn't shown on screen, press [MENU] to enter OSD interface. The OSD
interface uses "ACER e Color Management" and "User" to instead "Contrast" and
"Brightness" separately. When press "ACER e Color Management" to show "e Color
OSD", and press "User" to show OSD interface before. The translations of "ACER e
Color Management" and "User" are always English.
B. When OSD displays, press [MENU] to perform function of menu icon that is highlight or
enter next level menu
A. When "MENU OSD" displays, press these keys to change the contents of an
adjustment item, or change an adjustment value
B. When "MENU OSD" un-displays, if it is with audio, press [►] to show "Audio" OSD and
increase the volume, press [◄] to show "Audio" OSD and decrease the volume; else
it has no use to press these keys.
A. When OSD un-displays, press [e Color] to show "e Color OSD", and press again the
OSD can not disappear, but the time of "e Color OSD" disappearing is reset 10 second
again.
B. When OSD disappear not including "e Color OSD", press [e Color] to show "e Color
OSD" OSD, the OSD before disappears, but the parameters of it should be saved
Power on or power off the monitor
HOT KEY OPERATION
◄ ►
e Color
●
MENU POWER
●
ON
Third Control Range
---
0 ~ 100
---
0 ~ 100
10
Acer –LCD-B223W
Press [e Color ] & [MENU] at the
same time, and then press
[POWER] for DC power on. OSD
menu will be shown with "F" on the
left top. Select "F" for entering
factory mode.
Default Value
User mode
Text mode
Standard mode
Graphics mode
Movie mode
User mode
Text mode
Standard mode
Graphics mode
Movie mode
50
50
50
60
56
77
44
77
97
77