AirSep FreeStyle User Manual page 25

1. Make sure your power supply is securely connected to the FreeStyle inlet, as shown in
Figure 14.
2. Connect the proper DC power cord end to the ACCESSORY DC IN inlet on the power supply,
as shown in Figure 19.
3. Remove the tip of the DC connector by pressing on the tab to expose the 4-pin connector, as
shown in Figure 20.
4. Insert the 4-pin connection to the airline passenger DC outlet optionally available at your seat.
5. To operate the POC, press the FreeStyle [1], [2], or [3] setting on the unit's top panel, as
determined by your prescription. To turn the unit off, press the setting associated with the LED
illuminated above it
Figure 19
For more information on the universal power supply for FreeStyle or any AirSep product accessories,
please contact your local equipment provider.
MN131-1 rev C
.
Figure 20
EN-23