Page 1
User Manual Olympus Series Mid-Static Duct Air Handler (9K, 12K, 18K, 24K & 48K Models) Please keep this manual where the operator can easily find it. Inside you will find helpful hints on how to use and maintain your unit properly.
Page 2
76°F(24°C) setting temperature when the air conditioner restarts after power failure. And this may cause inconsistent displays on the wired controller and on the air conditioner. You need to readjust the running status through the wired controller. For more info visit www.mrcool.com...
6. NAME & OPERATION OF THE BUTTON ON THE WIRE CONTROLLER..7. USING METHOD ....................AUTOMATIC OPERATION................. COOLING/HEATING/FAN ONLY OPERATION..........DRY OPERATION....................TIMER SETTING....................TIMER ON AND TIMER OFF BOTH..............CHANGE TIMER....................8.TECHNICAL INDICATION AND REQUIREMENT ..........For more info visit www.mrcool.com...
It indicates forbidding. The forbidden subject-matter is indicated in the icon or by images or characters aside. It indicates compulsory implementation. The compulsory subject-matter is indicated in the icon or by images or characters aside. For more info visit www.mrcool.com...
1. Connecting to indoor unit by A, B, C, 1. Power supply: 5V DC. D, E terminal. 2. Operation temperature: 2. Button setting action mode. -15°C(-5°F)~ +43°C(+109°F). 3. LCD display. 3. Operation humidity: 40%-90%, RH. 4. Timer for rest time. For more info visit www.mrcool.com...
② Timer: wire controller, after setting temperature, When adjust setting on time or only on it will compare the two temperatures, time is set, the "ON" is lighted. and the space of wire controller will be For more info visit www.mrcool.com...
▲ and ▼. But in fan fan then the middle fan is seen as high mode, no display here. 5. INSTALLATION METHOD Emitter tube 5-way terminal 5-Core Shield Cable Indoor switch board Indoor Unit For more info visit www.mrcool.com...
FAN SPEED BUTTON LOCK BUTTON NOTE All the pictures in this manual are for explanation purpose only. There may be slightly different from the wire controller you purchased(depend on model). The actual shape shall prevail. For more info visit www.mrcool.com...
Page 9
Set indoor temperature down. if press and MODE button will not cancel the Follow hold on, it will decrease at 1°F(1°C) per me feature. This function is disable 0.5 second. when the unit is off or under DRY or FAN For more info visit www.mrcool.com...
LOCK But it restarts automatically and performs button. Use the lock mode when you previous operation when the power want to prevent setting from being supply is resumed. For more info visit www.mrcool.com...
1h. Press ON/OFF button again, it stops to 4. After setting 0.5 second, the wire work. controller send timer off information, it is 4. In dry mode, economy operation and finished. fan speed are ineffective. For more info visit www.mrcool.com...
If concel timer, change timer time to 0.0. NOTE The timer time is relative time,that is delay after setting time( i, e: setting time is 8:05 A,M). So when imer is set, the standard time can not be adjusted. For more info visit www.mrcool.com...
Page 13
Olympus Series Mid-Static Duct Air Handler (9K, 12K, 18K, 24K & 48K Models) The design and specifications are subject to change without prior notice. Consult with the sales agency or manufacturer for details. For more info visit www.mrcool.com...