Page 1
Due to updates and constantly improving performance, the information and instructions within this manual are subject to change without notice. Version Date: 10/21/2024 Please visit www.mrcool.com/documentation to ensure you have the latest version of this manual.
Page 2
• A means of strain relief and conductor protection must be provided at the supply wire entrance into the cabinet. • Use copper conductors only. • Installation must follow national electric codes and other applicable codes. mrcool.com...
HAH024FPA 10kW 10kW Heat Kit HAH036FEA HAH036FPA HAH060FEA HAH048FPA HAH060FPA HAH036FPA HAH036FEA 15kW 15kW Heat Kit HAH048FPA HAH060FEA HAH060FPA HAH036FPA HAH036FEA 20kW 20kW Heat Kit HAH048FPA HAH060FEA HAH060FPA Step 1: Remove the upper access panel from the air handler. mrcool.com...
Page 4
Remove the cover plate from the air handler. Step 3: Slide the heater kit into the slot and secure the element plate with previously removed screws. Step 4: Align the attachment clip with the hole and fasten the loose wires with a wire tie. mrcool.com...
Page 5
• When W1/W2 signal is off, the indoor blower will be turned off after a 90-second delay. • The blower motor runs when "G" is energized, and a 90s off delay when "G" is de-energized. mrcool.com...
Page 8
PRODIRECT™ Series Heat Kit The design and specifications of this product and/or manual are subject to change without prior notice. Consult with the sales agency or manufacturer for details.
Need help?
Do you have a question about the PRODIRECT Series and is the answer not in the manual?
Questions and answers