ZMODO 8000 Series User Manual
  1. Manuals
  2. Brands
  3. ZMODO Manuals
  4. DVR
  5. 8000 Series
  6. User manual
ZMODO 8000 Series User Manual

ZMODO 8000 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H.264 Network Digital Video Recorder User Manual
第 1 页

Advertisement

Table of Contents
loading

Related Manuals for ZMODO 8000 Series

Summary of Contents for ZMODO 8000 Series

  • Page 1 H.264 Network Digital Video Recorder User Manual 第 1 页...

  • Page 2: Important Safeguards And Warnings

    H.264 Network Digital Video Recorder User Manual Welcome Thank you for purchasing our DVR! This manual is designed to be a reference tool for the installation and operation of your system. Here you can find information about this series DVR features and functions, as well as a detailed menu tree. Before installation and operation please read the following safeguards and warnings carefully! Important Safeguards and Warnings Do not place the heavy object on the DVR.

  • Page 3: Table Of Contents

    H.264 Network Digital Video Recorder User Manual Contents 1 Production Introduction............................5 1.1 Product overview ............................5 1.2 Main functions ..............................5 2 Open-package check and cable connection......................6 2.1 Open-package check .............................6 2.2 Frame installation............................7 2.3 Front panel ..............................7 2.4 Rear panel ..............................9 2.5 Installation connections sketch map......................9 2.6 Audio and video input and output connections ...................10 2.6.1 Video input connections........................10...
  • Page 4 4.5 HDD manage ..............................33 4.6 Network setup .............................34 4.6.1 Network service ..........................34 4.7 PTZ config ..............................38 4.8 Alarm setup ..............................39 4.8.1 Motion detect ...........................33 4.8.2 Video blind............................45 4.8.3 Video loss............................41 4.8.4 Alarm input ............................42 4.8.5 Alarm output ............................42 4.9 System setup ...............................43 4.9.1 General setup............................43 4.9.2 GUI display ............................44 4.9.3 Account management ........................45...

  • Page 5: Production Introduction

    H.264 Network Digital Video Recorder User Manual 1 Production Introduction 1.1 Product overview The series DVR is designed specially for security and defence field which is an outstanding digital surveillance product. It introduces embedded LINUX operating system which is more stable. It introduces standard H.264mp video compressed format and G.711A audio compressed format which insures the high quality image, low error coding ratio and single frame playing.

  • Page 6: Open-Package Check And Cable Connection

    downloading and so on ·multi-playback mode ·zoom at arbitrary region Net operating ·through net tele-surveillance in the real time ·tele-PTZ control ·tele-recording check and real-time playback Alarm linkage ·multi-route relay alarm output which is convenient for the alarm linkage and light control at the spot ·protecting circuits at the alarm input and output interface which protects the main machine from damage Communication interface ·RS485 interface which fulfills the alarm input and PTZ control...

  • Page 7: Frame Installation

    The label in the real panel is very important for the after service. Please protect it carefully. When you contact us for after service, please provide the product type and serial number in the label. 2. After open the case should be checked In addition to checking whether there are obvious signs of external damage, please note that before the inspection panel data lines, power lines and motherboard connection is loose.
  • Page 8 Shift in the number button, character button and other function button Shift function button SHIFT during the user under input state Remove the cursor Add or decrease number during the user edit state Change the setting in the menu Enter 1 channel or 4 channels surveillance during surveillance image After pressing the shift button, press this button can enter 1 or 4 during edit Direction button state...

  • Page 9: Rear Panel

    2.4 Rear panel (Below just as the 4CH DVR for example,Specifically please refer to practical product.) (1) (2)(3) (4) (5) (6) (10) (1) power jack (2) network interface (3) USB interface for backup (4) USB Mouse interface (5) alarm & RS-485 interface (6) video VGA output (7) video output (8) audio output...

  • Page 10: Audio And Video Input And Output Connections

    2.6 Audio and video input and output connections 2.6.1 Video input connections The video input port is BNC connector plug. The demand of input signal is PAL/NTSC BNC(1.0V ,75Ω). The video signal must be accorded with the state standard which has the high signal to noise ratio, low aberration and low interference.

  • Page 11: Audio Signal Input

    2.6.3 Audio signal input Audio port is RCA connection. The input impedance is high so the tone arm must be active. The audio signal line should be firm and away from the electro magnetic Interference and connected credible which avoid false and joint welding and oxidation. The high voltage current should be avoided especially. 2.6.4 Audio signal output Commonly the output parameter of DVR audio signal is greater than 200mv 1KΩ(BNC) which can connect the low impedance earphone and active sound box or other audio output equipments through power amplifier.

  • Page 12: Alarm Input Port Specification

    quality. D. The RS485 +、- lines of DVR can not connected with other RS485 output equipments paralleled. The voltage between the +、- lines of the decoder must be less than 5V. 4、Front equipment grounding note Bad grounding can lead to the burnout of the chip. 5、...

  • Page 13: Alarm Output Port Specification

    The NC port of the alarm sensor must be connected with the DVR alarm input port. The grounding of the power supply and the alarm sensor must be shared when used in external power supply. 2.7.2 Alarm output port specification 1 channels alarm output.

  • Page 14: Basic Operation

    2、Connect the video line with the DVR video input. 3、Electrify the speed dome. 3. Basic operation Note: The button in gray display indicates nonsupport. 3.1 Turn on Plug the power supply and turn on the power supply switch. Power supply indicator light shining indicates turning on the video recorder.

  • Page 15: Login

    the time is not correct you must replace the battery, we recommend replacing the battery every year and using the same battery type. Note: The setting information must be saved before replacing the battery otherwise information will lose. 3.3 Login When the DVR boots up, the user must login and the system provides the corresponding functions with the user purview.

  • Page 16: Desktop Shortcut Menu

    List 3.1 Preview icon 3.5 Desktop shortcut menu In preview mode you can right click mouse to get a desktop shortcut menu. The menu includes: main menu, Record Mode,playback, PTZ control, color setting, Output Adjust, window switch ,Info and Logout. Picture 3.1shortcut menu 3.5.1 Main menu When you login, the system main menu is shown as below.

  • Page 17: Record Mode

    3.5.2 Record Mode Please check current channel status: “●” means it is in recording status. You can use desktop shortcut menu or click [main menu]> [record Mode] to enter the recording control interface Picture3.3 recording control interface 【Timing】Record according to the configuration. 【Manual】Click the all button and the according channel is recording no matter the channel in any state.
  • Page 18 Picture3.4 playback 1. listed files 2. file information 3.file backup option 4.file backup 5. file searching 6. playback control 7. operation hint 【listed files】Look up the listed files that accord with the searching criteria. 【file information】Look up the found file information. 【file backup option】Choose the file to backup .
  • Page 19 Erasure: Choose the file to delete and click erasure to delete the file. Stop: Stop the backup. Backup: Click backup button and the dialog box is popped up. You can choose the backup file according to the type, channel and time. Picture 3.6 recording backup Remove：Clear the file information.

  • Page 20: Ptz Control

    Button Function Button Function Play/Pause Backward Stop/Close Volume Slow play Fast play Previous frame Next frame Previous file Next file Circulation Full screen List 3.2 Playback control key list Note: Frame by frame playback is only performed in the pause playback state. 【operation hint】Display the function of the cursor place.

  • Page 21: Special Functions

    Picture3.8 PTZ setup 【speed】Set the PTZ rotation range. Default range: 1 ~ 8. button to adjust the zoom multiple of the camera. 【zoom】Click 【focus】Click button to adjust the focus of the camera . button to adjust the iris of the camera. 【iris】Click 【direction control】...
  • Page 22 Preset point input blank Preset button Picture 3.9 Preset Settings 2）Preset Point Calls In Picture 3.8, click Page Shift button, enter PTZ control interface as shown in Picture 3.10. In the input blank, write the preset points, then click Preset button, PTZ turn to the corresponding preset point. Value input blank Picture 3.10 PTZ Control 2、Cruise between Points...
  • Page 23 the cruise lines set。 Preset Points Blank Cruise Button Cruise Line Blank Picture 3.11 Cruise Between Points Settings 2）The Calls of Cruise between Points In Picture 3.8, click Page Shift button, enter PTZ control menu as shown in Picture 3.10. Please input the number of cruise in the value blank, then click Cruise between Points button, PTZ begins to work on the cruise line.
  • Page 24 input the number of scan in the value blank , then click Scan button，PTZ begins to work on the scan line . Click Stop button to stop. 4、Boundary Scan In the horizontal line, set up a line, called linear sweep, PTZ repeated according to the route setting operation.
  • Page 25 camera). Click the Stop button to stop. 6、Rotate Click on horizontal Rotating button, PTZ turn around. 7、Reset PTZ restart, all the data clears to 0.。 8、Page Shift In Picture 3.10, click Page Shift button into Picture3.14, setting auxiliary function. Auxiliary number auxiliary switch on the decoder.

  • Page 26: Output Adjust

    Picture 3.15 image color 3.5.6 Output adjust Adjust output area parameters. Picture 3.16 Output adjust 3.5.7 Window switch Preview in single window/four windows/eight windows/nine windows according to the choice. 3.5.8 System information System Information menu items include: hard disk information, log information, stream statistics, online users, and version information.

  • Page 27: Log Information

    Picture 3.17 hard disk information Notice： “○”means that the hard disk is normal. “X”means that the hard disk is broken-down.- means that there is no hard disk. If the user need to change the damaged hard disk, you must shut down the DVR and take up all the damaged hard disks then install a new one.

  • Page 28: Code Stream Statistics

    Picture 3.18 log information 3.5.8.3 Code stream statistics Display the code stream （Kb/S） and hard disk capability （MB/H） in real time. It displays as the wave sketch map. Picture 3.19 code stream statistics 3.5.8.4 Online user Look up the network user information in the local DVR. You can choose the network user and cut the connection.

  • Page 29: Logout

    Picture 3.21 edition information 3.5.9 Logout Logout, shut down the system or reboot up. You can use the desktop shortcut menu or enter [main menu]. Picture 3.22 shut down the system 【logout】Quit the menu. Offer password next entrance. 【shut down】Quit the system. Turn off the power supply. When press the shut down button, there is schedule hint.

  • Page 30: Main Menu

    H.264 Network Digital Video Recorder User Manual 4. Main menu 4.1 Main menu navigation Main menu Sub menu Function Record Mode Set the recording status of each channel Record config Set the recording configuration, recording type, recording time section Set main(assistant)coding parameter: code mode, resolving ability, frame rate, Encode code stream control, image quality type, code stream value, frame between value, video/audio enable...

  • Page 31: Record Mode

    Account Modify user, team or password. Add user or team. Delete user or team. Upgrade Upgrade to the DVR software system Resume setup state: common setup, code setup, recording setup, alarm setup, Resume config network setup, network service, preview playback, serial port setup, user management Backup Detect or format backup equipment, back the selective files...

  • Page 32: Encode Setup

    are two hard disks installed. One is read-write disk and the other is redundant disk. (refer to 4.5) 【length】Set the time length of each video file. 60minutes is default value. 【pre-recording】Record 1-30 seconds before the action. (time length is decided by the code stream) 【recording control】Set video state: configuration, all or stop.

  • Page 33: Hdd Manage

    【frame rate】P：1 frame/s~25 frame/s; N：1 frame/s~30 frame/s 【code stream control】You can choose limited code stream or variable code stream. When you choose the variable code stream there are six image quality options. 【code stream value】 Set the code stream value to modify the image quality. The larger code stream value the better image quality.

  • Page 34: Network Setup

    4.6 Network setup Picture4.4 network setup 【network card】You can choose cable network card or wireless network card. 【DHCP Enable】Obtain IP address automatically. Note：DHCP server is preinstalled. 【IP address】Set the IP address. Default: 192.168.1.10. 【subnet mask code】Set the subnet mask code. Default: 255.255.255.0. 【default gateway】Set the default gateway.
  • Page 35 Picture 4.5 interface, first select the Network Services entry and click the Settings button, or double-click the service parameter configuration items. Picture 4.5 network service 【PPPoE setup】 Picture4.6 PPPOE setup Input the user name and password that ISP（Internet service provider）provides. After saving it reboot up your system.
  • Page 36 The NTP server must be installed in the PC. Host computer IP：Input the IP address installed NTP server. Port：Default: 123. You can set the port according to NTP server. Time zone：London GMT+0 Berlin GMT +1 Cairo GMT +2 Moscow GMT +3 New Delhi GMT +5 Bangkok GMT +7 Hongkong Beijing GMT +8 Tokyo GMT +9 Sydney GMT +10 Hawaii GMT-10 Alaska GMT-9...
  • Page 37 【IP purview setup】 When choosing the white list, only the listed IP address can connect the DVR. The 64 IP addressed are supportive in the list. When choosing the black list, the listed IP address can not connect the DVR. The 64 IP addressed are supportive in the list.

  • Page 38: Ptz Config

    Picture 4.10 DDNS setup 4.7 PTZ config Picture 4.11 PTZ setup 【channel】Choose the dome camera input channel. 【protocol】Choose the corresponding dome protocol. (PELCOD as an example) 【address】 Set as the corresponding dome address. Default: 1. （Note： The address must be consistent with the dome address.）...

  • Page 39: Alarm Setup

    4.8 Alarm setup Alarm functions include: motion detect, video blind, video loss, alarm input and alarm output. 4.8.1 Motion Detect When system detects the motion signal that reaches the set sensitivity, the motion detect alarm is on and the linkage function is turned on. Picture 4.12 motion detect 【channel number】Choose the set motion detect channel.
  • Page 40 Picture 4.14 set the time section 【interval】Only one alarm signal is turned on even there are several motion detect signals in the set interval. 【alarm output】Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on. 【delay】Delay a few moments and stop when the alarm state is turned off.

  • Page 41: Video Blind

    4.8.2 Video Blind When the video image is influenced by the environment such as bad brightness or reaching the set sensitivy parameter, the camera mask function is turned on and the linkage function is turned on. Picture 4.16 Video Blind Set method: refer to chapter 4.8.1.

  • Page 42: Alarm Input

    4.8.4 Alarm input When the equipment obtains the external alarm signal, the alarm function is turned on. Notice: Advanced same the right mouse button Picture 4.18 alarm input Set method: refer to chapter 4.8.1. 4.8.5 Alarm output Please check current channel status: “○” means it is not in alarming status, “●” means it is in alarming status.

  • Page 43: System Setup

    4.9 System setup Set the system parameters such as general setup, GUI Display setup, Account setup, Upgrade, Restore config and backup. 4.9.1 General setup Picture 4.20 regular setup 【system time】Set the system data and time. 【data format】Choose the data format: YMD, MDY, DMY. 【list separator】Choose list separator of the data format.

  • Page 44: Gui Display

    Picture 4.21 summer time (week) setup Picture 4.22 summer time (data) setup 4.9.2 GUI Display Configure the video output parameters including the front output mode and code output mode. Front output：In the local preview mode include: channel name, time title, channel title, recording status, alarm status, code stream information, transparency and cover area.

  • Page 45: Account Management

    channel name. The 16 Chinese characters and 25 letters are supportive. 【time title】■ means the selective state. Display the system data and time in the surveillance window. 【channel title】■ means the selective state. Display the system channel number in the surveillance window. 【recording status】■...
  • Page 46 Note：1. The char length is 8 bytes at most for the following user and user team name. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid. Legal char include: letter, number, underline, subtraction sign, dot.
  • Page 47 Picture 4.26 modify password 【add user】 Add a user in the team and set the user purview. Enter the menu interface and input the user name and password. Choose the team and choose whether cover using the user. Cover using means that the account can be used by multiple users at the same time.

  • Page 48: Upgrade

    the delete team button in Picture 4.29, select the need to remove the team, click the delete button. Choose the team and click delete team button. Picture 4.29 delete team 4.9.4 Upgrade upgrade Picture 4.30 【upgrade】choose USB interface. 【upgrade file】choose the file which needs upgraded. 4.9.5 Restore config The system resume to the default setup.

  • Page 49: Backup

    Picture 4.31 resume default 4.9.6 Backup You can backup the video files to external storage through setup. Note：The storage must be installed before the file backup. If the backup is terminated, the already copy files can be playback individually. If the backup is stop midway,the already copy files also can be playback individually. Picture 4.32 detect the equipment 【detect】Detect the storage connected with the DVR such as hard disk or universal disk.

  • Page 50: Netview And Management

    Picture4.33 file backup remove：Clear the file information. add：Show the file information satisfying the set file attributes. start/pause：Click the play button to start the backup and click the pause button to stop the backup. cancel：During backup you can exit the page layout to carry out other functions. 5.
  • Page 51 Step 1: connect the device. Open a web browser, enter the IP address of the login device in the address bar. As the device with IP address 192.168.1.10 for example, then enter: http://192.168.1.10 in the address bar and connections. If the PC connect the device at first time, when open system, the security warning will pop up whether to accept the WEB control web.cab, please choose to accept the user, the system will automatically identify the installation.

  • Page 52: Client Sns Software Operation

    Picture 5.2 WEB holding interface 3、 WEB Control In Picture 5.2 WEB control interface to operate WEB. 1、 Menu Segment Choose the preview mode; 2、 Playback Enter into the playback mode,support 4chanel playback at the same time; 3、 Log Display the log information； 4、...

  • Page 53: Web Network Control

    Please take out the CD-ROM in the accessories, copy the SNS install software in the CD-ROM After installation on the local PC, open the control interface appears in Picture 5.3. Click the upper right corner "+", follow the notice, enter the DVR device information need to control, can control the specified device, control method same as the third step WEB manipulation.
  • Page 54 The power supply is not correct. Switch power supply line is not in good connection. Switch power supply is damaged. The program updating is wrong. The hard disk is damaged or the hard disk lines are broken. The front panel is damaged. The main board of the DVR is damaged.
  • Page 55 When using the BNC output, the option between the N mode or PAL mode is wrong and the image becomes black and white. The DVR is not matched the monitor impedance. The video transmission distance is too far or the loss of the video transmission line is too large. The color and brightness setting of the DVR is wrong.
  • Page 56 Possible reasons are as followed: Setting is wrong.. The battery is in bad connection or the voltage is too low. The oscillation is damaged. 11、 The DVR can not control the PTZ. Possible reasons are as followed: There is something wrong with the frontal PTZ. The setting, connection or the installation of the PTZ decoder is not correct.
  • Page 57 The user edition is not matched the DVR program edition. 14、 The image is not clear or there is no image in network preview state or video file playback state. Possible reasons are as followed: Network is not stable. The user machine is resource limited. Choose the play-in-team mode in the network setup of DVR.
  • Page 58 Possible reasons are as followed: The setting of the alarm is not correct. The alarm output is turned on manually. The input machine is damaged or the connections are not correct. There are some problems for specific program edition, Please update the program. 19、...

  • Page 59: Maintenance

    Please contact the local service or call the HQ service. We will offer the service according the machine type and the program edition. 6.2 Maintenance Please brush printed circuit boards, connectors, fans, machine box and so on regularly. Please keep the grounding well done to prevent the video or audio signal interfered and the DVR from static or inductive electricity.

  • Page 60: Appendix 2.Mouse Operation

    Input the number of DVR to control it Assistant function Record control Control the record Record mode Same function as “Record mode” Appendix 2.Mouse operation *Take right hand as an example The mouse in USB connection is supportive. Operation Function Double click one item in the file list to playback the video Double click the playback video to zoom in or out the screen Double left click...

  • Page 61: Appendix 3.Hard Disk Capability Calculation

    H.264 Network Digital Video Recorder User Manual Appendix 3.Hard disk capability calculation Make sure the hard disk installed to install the DVR for the first time. Pay attention to the IDE hard disk lines connection. 1、 Hard disk capability There is no limit for recording machine. We recommend 120G~250G size to keep better stability. 2、...
  • Page 62 display 1/4image display 1/4/8/9 image display 1/4/8/9/16 image display Video standard PAL（625string，50 field/s） Surveillance image PAL, D1(704×576) quality Playback image PAL,D1(704*576)/HD1(704*288)/CIF(352×288) quality Video Image compression H.264 mp Image control 6 options PAL, 100fps Recording speed(CIF) PAL, 200fps overall PAL,400fps overall overall Image motion detect 396(22×18) detection areas, multiple sensitivity...
  • Page 63 Circulation output Matrix output Audio input 4channel RCA 4channel RCA 4channel RCA Audio output 1channel RCA Alarm input 4channel 4channel 8channel Alarm output 1channel 1channel 1channel Network port RJ45 10M/100M adoptive Ethernet network port PTZ control port 1 RS485 USB port 2 USB ports（synchronous use front and rear panel forbidden）...

Table of Contents