Related Manuals for Radius m1225
Summary of Contents for Radius m1225
- Page 1 Operator Guide for M1225 Mobile Radio Copyright © 1997 Motorola, Inc. All rights reserved Guide de l'utilisateur pour les radios mobiles M1225 © Motorola, Inc., 1997. Tous droits réservés. 6880904Z85-O...
- Page 2 M1225 (numéro de pièce 6880905Z15 de Motorola). Ce guide devrait être compris avec la radio. Toutefois, si vous avez besoin d'un guide d'installation et d'obtention de licence ou d'un guide de l'utilisateur de rechange, veuillez communiquer avec le dépositaire Radius...
- Page 3 Controls and Visual Indicators Controls A. On/Off/Volume Knob B. Channel Up/Down Button C. Scan Button D. Option Buttons (A, B, C) E. Microphone Push-To-Talk (PTT) Button Visual Indicators 1. Light-Emitting Diode (LED) 2. Transmit ( ) / Receive ( ) Icon 3.
-
Page 4: Set Volume
Basic Operating Instructions Turn the Radio On/Off Turn the on/off/volume knob until it clicks. If the radio is operating properly, a short, high-pitched tone sounds. If the radio is not operating properly, a continuous low-pitched warning tone sounds. Set Volume Using the on/off/volume knob, adjust the volume to a comfortable listening level. - Page 5 Basic Operating Instructions Receive Press to select the desired channel or press and hold to scroll through the channels. Make sure the PTT is released. Listen for voice activity. Blinks when the radio is receiving. Transmit NOTE: In the United States, FCC regulations require you to monitor the channel before you transmit. Refer to the Programmable Options section of this manual for Monitor instructions.
-
Page 6: Busy Channel Lockout
Standard Programmable Features Time-Out Timer (T.O.T.) Limits the amount of time you have to transmit. Preprogrammed from 1 to 255 seconds or off. When you reach the time limit, a continuous, low-pitched tone sounds (until you release the PTT) and your transmission is cut off. Busy Channel Lockout Several groups of radio users may share a channel. - Page 7 Standard Programmable Features User Programmable Scan Your radio has the capability to add or delete channels in your scan list. The radio CANNOT be in the Scan Mode when you program the scan list. Press and hold Two high-pitched tones sound, indicating that you are in the User Programmable Scan Mode. “SCAN PRG”...
- Page 8 Standard Programmable Features Scan Your radio is equipped with scan, which allows you to search for activity on multiple channels. When activity is found on a channel, the radio locks on and suspends scanning. NOTE: Scan will always search for and go directly to a priority channel, even if scan has locked onto another channel. Press to activate Scan Mode.
- Page 9 Standard Programmable Features Scan (ContÕd.) • Nuisance Channel Delete – temporarily deletes an unusually busy channel from the scan list. You can delete channels only while the radio is in channel scan mode and is receiving activity on the nui- sance channel.
- Page 10 Option Button Programmable Features Your dealer can program each of the three option buttons (A, B, or C) to perform one of the fol- lowing eight options. Repeater/Talkaround Repeater/Talkaround Mode gives you the option of using a repeater system for extended range or talk- ing to other radio users in direct range of your radio without using the repeater.
- Page 11 Option Button Programmable Features Monitor On-Off/Volume Set Monitor/Volume Set allows you to monitor the channel for activity when PL is enabled (same as taking the microphone off hook) or to set the volume. Your radio defaults to Monitor Off Mode when it is turned To Monitor NOTE: In the United States, FCC regulations require you to monitor the channel before you transmit.
- Page 12 Option Button Programmable Features Monitor On-Off/Volume Set (ContÕd.) To Set The Volume Press and hold for 1 second your preprogrammed Monitor/Volume Set option button (A, B, or C). You will hear “static.” Using the on/off/volume knob, adjust the volume to a comfortable listening level. Press again to exit Volume Set Mode.
- Page 13 Option Button Programmable Features Advantageª Board Enable/Disable Advantage Board Enable/Disable allows you to turn the features of an Advantage Board on and off. Your radio defaults to Advantage Board Disable Mode when it is turned on. Hi/Low Power Hi/Low Power allows you to toggle between Hi and Low Power Mode. Your radio defaults to Hi Power when it is turned on.
- Page 14 Troubleshooting Symptom Problem Solution Radio is “dead.” No power to radio. Check vehicle battery and all cable connections. If all are o.k., contact your local dealer for service. Low-pitched continuous tone when Internal defect. Press and release the PTT to stop tone. Contact turning the radio on.