JVC KD-AVX1 Service Manual page 10

3.1.3 Removing the top chassis assembly
(See Figs.3 to 6)
• Remove the panel assembly and side heat sink.
(1) From the top side of the main body, remove the two screws
C attaching the top chassis assembly. (See Fig.3.)
(2) From the back side of the main body, remove the two
screws C attaching the top chassis assembly. (See Fig.4.)
(3) From the both sides of the main body, remove the two
screws C and screw D attaching the top chassis assembly.
(See Figs.5 and 6.)
(4) Lift the top chassis assembly in the direction of the arrow
and disconnect the connector
board from the connector
Fig.6.)
(5) Take out the top chassis assembly from the main body.
1-10 (No.MA165)
CN966 on the main sub
CN961 on the main board. (See
Top chassis assembly
C
Fig.3
Top chassis assembly
Fig.4
Top chassis assembly
C
Fig.5
Top chassis assembly
Main sub board
Main board
Fig.6
C
C
D
CN966
C
CN961