Hitron CGN3 User Manual page 21

Table 3: LEDs
WIRELESS Off
(2.4GHZ)
Green, steady
Green, blinking
Bi-color
WIRELESS Off
(5GHZ)
Green, steady
Green, blinking
Bi-color
USB Off
Green, steady
Green, blinking
When you turn on the CGN3, the LEDs light up in the following order:
1
POWER
2
DS
3
US
4
STATUS
The LAN LED lights up as soon as there is activity on the LAN ports, the
WIRELESS LEDs light up once the wireless network is ready, and the USB LED
lights up once a connected device on either USB port is detected.
21 21
Version 1.1, 08/2013. Copyright
Version 1.1, 08/2013. Copyright
Hitron CGN3 User's Guide
The 2.4GHz wireless network is not enabled.
The 2.4GHz wireless network is enabled, and no
data is being transmitted or received over the
2.4GHz wireless network.
The 2.4GHz wireless network is enabled, and data
is being transmitted or received over the 2.4GHz
wireless network.
Wi-Fi Protected Setup (WPS) is in operation on the
2.4GHz wireless network.
The 5GHz wireless network is not enabled.
The 5GHz wireless network is enabled, and no data
is being transmitted or received over the 5GHz
wireless network.
The 5GHz wireless network is enabled, and data is
being transmitted or received over the 5GHz
wireless network.
Wi-Fi Protected Setup (WPS) is in operation on the
5GHz wireless network.
No USB device is connected to either USB port.
A USB device is connected to one of the USB ports,
and is not transmitting or receiving data.
A USB device is connected to one of the USB ports,
and is transmitting or receiving data.
2012 Hitron Technologies
2013 Hitron Technologies