Adjustments
Display Brightness and Contrast Adjustment
Display Brightness and Contrast Adjustment
Introduction
The following procedure should be performed whenever a front panel
assembly or processor assembly are replaced.
The brightness is controlled automaticaly after executing the
Set Brightness
Note
Procedure
3-12
softkey, located under the
The contrast adjustment is subjective and varies according to
individual user requirements.
1. Access the
Display
increase the contrast, or the
of the display.
2. When the desired display contrast level is obtained, press the
softkey, located under the
Set Contrast
menu.
Service
softkey menu and use the
softkey to decrease the contrast
HP EPM-441A/442A Service Guide
softkey menu.
softkey to
softkey
Service