Ftg Mode - LG 32LY760H Setup Manual

Installer Menu
To create a Master TV Setup, you will need to know how to access
the commercial controller (PTC) Installer Menu and make changes to
the default values as required. If necessary, familiarize yourself with
the Installer Menu and how to make and save changes. Refer to
pages 26 to 35 for information on accessing the Installer Menu and
for detailed descriptions of the Installer Menu items.
TV Setup Menus
On-screen setup menus control the features of the TV. Use the
Installer Remote to access the TV setup menus, and set the TV
features to the desired configuration for the end user.
Cloning
Cloning refers to the process of using a Master TV Setup to configure
a Target TV. The Master TV's clonable setup menu features should be
configured as part of the Master TV Setup. If there are features in
the Master TV's setup—channel icons or labels, digital font options,
etc.—that are not set or that are set incorrectly, those features also
will not be set or will be set incorrectly in the Target TVs. Refer to
pages 39 to 44 for detailed information on cloning requirements and
procedures.
External MPI Control
To control the TV using an external MPI control device, you must use
the TV's MPI port for communication purposes.
Note: These TV models are not equipped with MPI card slots.

FTG Mode

In this mode, the TV's CPU is configured with an FTG Channel Map,
and the CPU controls and restricts the tuning operation of the TV
based on this FTG Channel Map. The FTG Channel Map enables the
decryption of each Pro:Idiom
logical channel mapping of physical RF channels (analog and digital),
IP channels, and Aux inputs. In addition, in these models, depending
on the types of channels included in the FTG Channel Map, FTG
Mode provides the option to select either logical or physical tuning
(see notes below) during configuration.
Note: Logical channel mapping of physical RF channels eliminates
dash tuning; for example, physical 19-3 can be mapped to logical
channel 9. It also allows physical RF channels, IP channels, and Aux
inputs to be listed in any order, not only in physical numeric ascending
order. Physical channel tuning requires that you include the dash
when direct entering RF channel numbers and Aux inputs (the latter
designated by 130-0 through 137-0).
Note: Physical channel tuning is not available when IP channels are
included in the FTG Channel Map.
206-4259
®
encrypted channel and also provides
Commercial Mode Overview (Cont.)
xxLY760H PTC INSTALLER MENU
CPU-CTV
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC D279
PTC V1.01.037 CPU V3.02.33.01
Typical Installer Menu
QUICK SETTINGS
Quick
Picture
Channels
Picture Mode
Sound
Sound Mode
^
Standard
Aspect Ratio
General
16:9
Sleep Timer
^
Off
Safety
Accessibility
TV Setup Menus
7