Volume Control Buttons; Bass Control - Audiovox Rampage ACD-17 Owner's Manual

OPERA A A A A T T T T T ING INSTRUC OPER OPER ING INSTRUC ING INSTRUCT T T T T IONS ING INSTRUC
OPER OPER ING INSTRUC
9 14
19
TRACK/SKIP
BAND
18
1
1 1 1 1 1
POWER (PWR) ON-OFF BUTTON
Press this button ( ) to turn the unit on and
off when the ignition switch is on. When the unit
is off, the time of day is automatically displayed
on the Liquid Crystal Display (LCD) panel
unless the ignition switch is off. If the radio is
off when the ignition switch is turned off, the
POWER button must be pressed to turn on the
radio after the ignition switch is turned on. If the
ignition switch is turned off while the radio is
on, the radio will come on automatically when
the ignition switch is again turned on.
2 2 2 2 2

VOLUME CONTROL BUTTONS

To increase the volume level, press the
VOL + button. The volume will increase and the
level will be shown on the display panel from
a minimum of VOL 0 to a maximum of VOL
63. To decrease the volume level, press the
VOL - button. The display will automatically
return to the normal indication 5 seconds
after the last volume adjustment or when an-
other function is activated. These buttons
are also used in conjunction with the SEL
IONS IONS
IONS IONS
24
15 17
ACD-17 ACD-17 ACD-17
ACD-17 ACD-17
ACD-13
8, 22 12,20
11,21
button to adjust the bass, treble, balance and
fader levels as described in
3 3 3 3 3
This button is used to select the audio func-
tion (volume, bass, treble, balance or fade) to
be adjusted using the VOL + and - buttons.
Pressing the Select button once will set the
unit for volume adjustment (VOL will appear
on the display panel, followed by the setting
number). Pressing the button additional times
will select bass adjustment (BAS on display
panel), treble adjustment (TRE), balance (BAL),
fader (FAd), and volume (VOL) again. The dis-
play will return to the normal indication 5
seconds after the last adjustment or when
another function is activated.
4 4 4 4 4
To adjust the bass level, first select the Bass
mode by pressing the SEL button until the BAS
indication appears on the display panel. Within
5 seconds of choosing the Bass mode, press
the VOL + or - buttons to adjust the bass
conditions; the unit should be left in the stereo
13 16
EJECT
T U NING
VOL
SEL
VOL
MUTE
T/F
3, 4, 5, 6, 7
4
SELECT (SEL) BUTTON

BASS CONTROL

23
27
REL
10
25
26
2
5 6 7
, , ,and .
7 7 7 7 7