Before You Begin - Weslo pursuit 690S User Manual

BEFORE YOU BEGIN

Thank you for selecting the new WESLO ® PURSUIT
690s exercise cycle. The PURSUIT 690s blends
advanced engineering with contemporary styling to
provide you with a low-impact workout in the conve-
nience and privacy of your own home.
For your benefit, read this manual carefully before
you use the PURSUIT 690s. If you have additional
questions, please call our Customer Service
Department at 0345-089009. To help us assist you,
Water Bottle Holder
(Bottle not included)
Book Rack
FRONT
Pedal
Wheels
LEFT SIDE
please mention the product model number and serial
number when calling. The model number is
WLEVEX14500. The serial number can be found on a
decal attached to the exercise cycle (see the front
cover of this manual for the location of the decal).
Before reading further, please look at the drawing
below and familiarise yourself with the parts that are
labelled.
Handlebars
Console
Resistance Knob
Pulse Sensor
Seat
Seat Post
Seat Knob
BACK
4
HOW TO ADJUST THE BELT
The exercise cycle features a precision belt that must
be kept properly adjusted. If the belt causes exces-
sive noise or slips as you pedal, the belt should be
checked. To do this, the left side shield must first be
removed. Refer to the instructions on page 12 and
remove the left
side shield.
Next, use an
adjustable
16
wrench to turn
the right pedal
counterclock-
wise and
remove it.
Remove the
right side
shield.
Press down on the centre of the Belt (16) between the
front and rear sprockets. There should be from 1/4"
to 3/4" of vertical movement in the centre of the
Belt.
If the Belt (16) is properly adjusted, reattach the side
shields and pedals. If the Belt needs to be adjusted,
loosen the M8 Washer Nut (37) on each side of the
Flywheel (32).
To tighten the
Belt, turn the
two M6 Stop 16
nuts (47) clock-
wise; to loosen
the belt, turn
the Nuts coun-
terclockwise.
Make sure that 37
the Flywheel is
straight and
tighten the M8
Washer Nuts (37). Reattach the side shields and
pedals.
13
32
47